---
title: "GdiGraphics..::.DrawBeziers Method (Pen, array<PointF>[]()[])"
canonical: https://www.graphicsmill.com/docs/gm5/M_Aurigma_GraphicsMill_Drawing_GdiGraphics_DrawBeziers_2_a58b81e0.htm
product: "Graphics Mill 5.5 for .NET"
---

This documentation is for the old version. [Go to the latest Graphics Mill docs](https://www.graphicsmill.com/docs/gm/)

# GdiGraphics.DrawBeziers Method (Pen, PointF[])
 
Draws a sequence of connected Bezier splines.
 
**Namespace:** [Aurigma.GraphicsMill.Drawing](https://www.graphicsmill.com/docs/gm5/N_Aurigma_GraphicsMill_Drawing.htm.md)
 **Assembly:** Aurigma.GraphicsMill (in Aurigma.GraphicsMill.dll)
 
## Syntax
  
```
Public Sub DrawBeziers ( _pen As Pen, _points As PointF() _
)
```
 
```csharp
public void DrawBeziers(Pen pen,PointF[] points
)
```
 
### Parameters
 
 - pen
     - Type: [Aurigma.GraphicsMill.Drawing.Pen](https://www.graphicsmill.com/docs/gm5/T_Aurigma_GraphicsMill_Drawing_Pen.htm.md)
 [Pen](https://www.graphicsmill.com/docs/gm5/T_Aurigma_GraphicsMill_Drawing_Pen.htm.md) object which is used to draw an spline.

 - points
     - Type:  [System.Drawing.PointF](http://msdn2.microsoft.com/en-us/ckys1c1e) []
Array of coordinates of the splines start, end, and control points.
 
## Remarks
  
A single Bezier spline is defined with four points: first and last point specify beginning and end of the curve, second and third points specify so-called control points. The control points act as magnets, pulling the curve in certain directions to influence the way the Bezier spline bends.
 
The end point of each spline is a start point for the next one. So the *points* array should have at least 4 points and + 3 points for each extra spline.
 
All the coordinates are measured in units specified with [Unit](https://www.graphicsmill.com/docs/gm5/P_Aurigma_GraphicsMill_UnitConverterObject_Unit.htm.md) property.
   
## See Also

### Reference

- [GdiGraphics Class](https://www.graphicsmill.com/docs/gm5/T_Aurigma_GraphicsMill_Drawing_GdiGraphics.htm.md)
- [DrawBeziers Overload](https://www.graphicsmill.com/docs/gm5/O_T_Aurigma_GraphicsMill_Drawing_GdiGraphics_DrawBeziers.htm.md)
- [Aurigma.GraphicsMill.Drawing Namespace](https://www.graphicsmill.com/docs/gm5/N_Aurigma_GraphicsMill_Drawing.htm.md)